HPE Networking Comware Switch 48G 4SFP+ 1-slot 5140HI

HPE Networking Comware Switch 48G 4SFP+ 1-slot 5140HI, Managed, L3, Gigabit Ethernet (10/100/1000), Power over Ethernet (PoE), Rack mounting, 1U

Reasons To Buy

Highly Resilient and Scalabale Access Layer Switches

The HPE Networking Comware Switch Series 5140 HI uses Intelligent Resilient Framework (IRF) to support virtualization of up to nine physical switches into one logical device for simpler, flatter, and more agile networks.
Supports 10GbE uplinks, static and RIP routing, PoE+, ACLs, and IPv6 for improved and cost‐effective network performance.
DRNI enables link aggregation from multiple switches to implement device-level link backup for node redundancy. DRNI also simplifies network topology by virtualizing two physical devices into a logical device.
iNQA helps in measuring network packet loss performance, forward, reverse, and two-way packet loss, including lost number of messages and bytes, message loss, and byte loss rate.
Dual, redundant, hot-swappable power supplies maintain a dynamic and highly available network switch, delivering up to 1440 Watts of PoE+ for powered cameras, phones, and wireless Access Points.

Robust Quality of Service (QoS)

The 5140 HI Series supports advanced classifier-based QoS which groups traffic using multiple match criteria based on Layer 2 and 3 information; it applies QoS policies such as setting priority level and rate limit to selected traffic on a port, VLAN, or the entire switch.
Provides extensive traffic prioritization with strict priority (SP) queuing, weighted round robin (WRR), and SP+WRR.
Broadcast control and limitation of broadcast traffic rate can reduce unwanted network traffic and preserve more bandwidth for critical data.

Comprehensive Security Control

The 5140 HI Series supports flexible authentication methods including 802.1X, MAC Authentication and Encryption for greater device security and policy-driven application authentication. Per-user Access Control Lists (ACLs) provide identity-driven security and access control.
Dynamic ARP protection with functions such as ARP Detection and ARP packet validation blocks broadcast from unauthorized hosts and prevents eavesdropping or theft of network data.
Supports industry standard AES256 MACsec which provides increased MAC port binding and link group capacity for greater end-to-end security.
Centralized security policy management and network protection with HPE Intelligent Management Center (IMC) which leverages End User Admission Domination (EAD) integrated security policies, network access control and access right control policies to provide a comprehensive integrated security system.
Security with encryption of all access methods (CLI, GUI, or MIB) through SSHv2, SSL, and/or SNMPv3, and other features including DHCP protection, IP source guard, dynamic ARP protection, and RADIUS/HWTACAS.

Simplified Management

The 5140 HI Series can be seamlessly managed with HPE Intelligent Management Center (IMC) Software to provide end-to-end network transparency with consistent network experience through comprehensive configuration, compliance, and policy management.
Supports SmartMC, an embedded network management tool, with a web-based GUI to simplify operations and facilitate centralized management at no additional cost. It offers features such as configuration backup, software version management, and seamless switch replacement.
RMON and sFlow provide advanced monitoring and reporting capabilities for statistics, history, alarms, and events to help network operators with capacity planning and real-time network monitoring.

Description

HPE Networking Comware Switch 48G 4SFP+ 1-slot 5140HI. Switch type: Managed, Switch layer: L3. Basic switching RJ-45 Ethernet ports type: Gigabit Ethernet (10/100/1000), Basic switching RJ-45 Ethernet ports quantity: 48, Installed SFP+ modules quantity: 4. MAC address table: 32000 entries, Switching capacity: 336 Gbit/s. Networking standards: IEEE 802.1ab, IEEE 802.1ad, IEEE 802.1x, IEEE 802.3at. DC input voltage: 48 - 60 V. Power over Ethernet (PoE). Rack mounting, Form factor: 1U

Specifications

Management features
Switch layer	L3
Switch type	Managed
Quality of Service (QoS) support	Yes
Ports & interfaces
Basic switching RJ-45 Ethernet ports quantity	48
Basic switching RJ-45 Ethernet ports type	Gigabit Ethernet (10/100/1000)
Installed SFP modules quantity	0
Installed SFP+ modules quantity	4
Network
Networking standards	IEEE 802.1ab, IEEE 802.1ad, IEEE 802.1x, IEEE 802.3at
10G support	Yes
Data transmission
MAC address table	32000 entries
Switching capacity	336 Gbit/s
Throughput	180 Mpps
Packet buffer memory	4 MB
Design
Rack mounting	Yes
Stackable	Yes
Form factor	1U
Performance
Physical stacking (units)	9
Internal memory	2048 MB
Flash memory	512 MB
Stackable	Yes
Packet buffer memory	4 MB
Power
Power supply included	Yes
AC input voltage	100 - 240 V
Power consumption (typical)	96 W
DC input voltage	48 - 60 V
Power consumption note	96 W (dual DC)
Power source	AC
Power supply note	2 power supply slots 1 minimum power supply required
Power over Ethernet (PoE)
Power over Ethernet (PoE)	Yes
Total Power over Ethernet (PoE) budget	720 W
Other features
Latency	< 5 microseconds (64-byte packets)
Performance management	HPE IMC; Smart MC, command-line interface; web browser; SNMP manager
Memory and processor	2 GB SDRAM; Packet buffer size: 4 MB, 512 MB flash
Weight (imperial)	10.6 lbs
I/O ports	48 RJ-45 autosensing 10/100/1000 ports (IEEE 802.3 Type 10BASE-T, IEEE 802.3u Type 100BASE-TX, IEEE 802.3ab Type 1000BASE-T), 4 1/10G SFP+ ports, 1 port expansion module slot.
Dimensions (W x D x H) (imperial)	1.72 x 17.32 x 14.17"
Weight & dimensions
Width	1.72" (43.7 mm)
Depth	17.3" (440 mm)
Height	14.2" (360 mm)
Weight	10.6 lbs (4.8 kg)