HPE Networking Comware Data Center Switch 32p SFP+ 1G/10G 6p QSFP28 100G 5720

HPE Networking Comware Data Center Switch 32p SFP+ 1G/10G 6p QSFP28 100G 5720, Managed, L2, Rack mounting

Reasons To Buy

Multigigabit High-density Switches

The HPE Networking Comware Switch Series 5720 provides medium and large enterprise networks with 24/40 port 1G/2.5G/5G/10GBASE-T and 32/48 port 10G SFP+ connectivity options, thereby resulting in high density and flexibility.
The switch series delivers up to 1001.7 Mpps of packet forwarding rate and up to 2240 Gbps of switching capacity.
It supports jumbo frames with a frame size of up to 9216 bytes, improving the performance of large data transfers.
It supports equal-cost multi-path that enables multiple equal-cost links in a routing environment to increase link redundancy and scale bandwidth.

Highly Available and Scalable Access Layer Switches

The HPE Networking Comware Switch Series 5720 uses Intelligent Resilient Framework (IRF) that supports virtualization of up to nine physical switches into one logical device for simpler, flatter, and more agile networks.
DRNI, an IEEE standard-based solution, enables link aggregation from multiple switches to implement device-level link backup for node redundancy. DRNI also simplifies network topology by virtualizing two physical devices into a logical device.
Dual, redundant, hot-swappable power supplies maintain a dynamic and highly available network.
VXLAN and EVPN allow greater flexibility to integrate into existing networks, better scalability without redesigning the underlay network, enhanced security to restrict attacks, and improved performance, especially in spine-leaf architectures.

Robust Quality of Service (QoS)

The HPE Networking Comware Switch Series 5720 supports operations, administration, and maintenance (OAM) and In-Service Software Upgrade (ISSU) for business continuity and improving manageability.
It supports advanced classifier-based QoS, which groups traffic using multiple match criteria based on Layer 2 and 3 information; it applies QoS policies such as setting priority level and rate limit to selected traffic on a port, VLAN, or the entire switch.
This switch series provides extensive traffic prioritization with strict priority (SP) queuing, weighted round robin (WRR), and SP+WRR.
Broadcast control and limitation of broadcast traffic rate can reduce unwanted network traffic.

Comprehensive Security and Simplified Management

HPE Networking Comware Switch Series 5720 supports AAA authentication (including RADIUS authentication) and dynamic or static binding of user identifiers such as user account, IP address, MAC address, VLAN, and port number.
The switch series supports methods including 802.1X and MAC authentication and encryption for greater device security and policy-driven application authentication. Per-user access control lists (ACLs) provide identity-driven security and access control.
Dynamic Address Resolution Protocol (ARP) protection with functions such as ARP detection and ARP packet validation that block broadcasts from unauthorized hosts and prevent eavesdropping or theft of network data.
This switch series provides a single pane management via through HPE Intelligent Management Center (IMC), maintaining comprehensive configuration, compliance, and policy management to enable end-to-end network visibility, control, and a consistent network experience.
It supports HPE IMC Orchestrator and Analyzer that offers orchestration, underlay and overlay automated service provisioning, centralized control and AI-enabled network health monitoring with telemetry, and visual dashboards for fault detection and resolution.

Description

HPE Networking Comware Data Center Switch 32p SFP+ 1G/10G 6p QSFP28 100G 5720. Switch type: Managed, Switch layer: L2. MAC address table: 280000 entries, Switching capacity: 2240 Gbit/s. Networking standards: IEEE 802.3x, IEEE 802.3u, IEEE 802.3az, IEEE 802.3ae, IEEE 802.3ac, IEEE 802.3, IEEE 802.1x, IEEE.... DC input voltage: 48 - 60 V. Rack mounting

Specifications

Management features
Switch layer	L2
Switch type	Managed
Quality of Service (QoS) support	Yes
Ports & interfaces
Basic switching RJ-45 Ethernet ports type	No
SFP+ module slots quantity	32
Network
Networking standards	IEEE 802.3x, IEEE 802.3u, IEEE 802.3az, IEEE 802.3ae, IEEE 802.3ac, IEEE 802.3, IEEE 802.1x, IEEE 802.1w, IEEE 802.1s, IEEE 802.1p, IEEE 802.1AX, IEEE 802.1AE, IEEE 802.1ak, IEEE 802.1ad
10G support	Yes
Data transmission
MAC address table	280000 entries
Switching capacity	2240 Gbit/s
Throughput	1001 Mpps
Protocols
Routing protocols	MPLS, OSPF, RIP
Design
Rack mounting	Yes
Stackable	Yes
Product colour	Black
Performance
Physical stacking (units)	9
Internal memory	4096 MB
Stackable	Yes
Power
Power supply included	No
AC input voltage	100 - 240 V
AC input frequency	50/60 Hz
DC input voltage	48 - 60 V
Power consumption note	Dual AC 90 W
Power source	AC
Power supply note	AC: 2x JL592A/JL593A DC: 2x JL688A
Other features
Latency	< 3 μs
Performance management	IMC, IMC Orchestrator, CLI, out-of-band management, SNMP Manager, Telnet, FTP
Memory and processor	4 GB flash, 4 GB SDRAM, packet buffer size: 32 M Quad Core ARMv8-Cortex-A72;
I/O ports	32 SFP+,6 QSFP28,1 Slot
Operational conditions
Heat dissipation	785 BTU/h
Weight & dimensions
Width	17.3" (440 mm)
Depth	15.7" (400 mm)
Height	1.73" (44 mm)
Weight	17.9 lbs (8.1 kg)